Great tips for removing old dowels and loosening stuck dowels. So it should be child’s play with the dowels. With instructions for filling holes.
Legal to remove the old dowel
There are more and more clauses in rental agreements about cosmetic repairs. A reasonable number of dowel holes are tolerated in the bathroom. But only those that need to be attached to towel rails or mirrors. However, if the rental contract also obliges you to carry out cosmetic repairs, you must at least close the holes.
Remove old dowels with a corkscrew
Removing old dowels is made very easy: If you have an old dowel in the wall, you can easily remove the dowel with a corkscrew. Simply turn the corkscrew in the old dowel in the wall. And then pull out together with the dowel.
Use an old screw if the dowels are stuck
If the anchor is too tight in the wall, it’s better to screw an old screw into the anchor. So you can easily take a pair of pliers and lever the dowel together with the screw out of the wall like a nail. But be careful not to damage the wall too much. And removing stuck screws should also be done.
Fill dowel holes with putty
After removing the dowel, you can close any holes in the wall or moving cracks in the screed. Putty from the hardware store is suitable for this. The filler can be bought ready-to-use in tubes for approx. 3 EUR in hardware stores. You can then use a spatula to easily fill in the dowel holes.
Mix the filler or apply it directly to or into the holes with the spatula. Then use the spatula to distribute the mass evenly around the dowel hole. After the putty has dried, you can smooth everything out with sandpaper.
